MLT 2 / BINOS
SYMBOLS ON OR INSIDE THE INSTRUMENT
This symbol appearing on or inside the
instrument ...
S-2
100 F
... signals
hazardous voltages are likely to be present.
Covers should only be removed when power
is removed from the equipment — and then by
trained service personnel only.
hot surfaces are likely to be present. Covers
should only be removed by trained service per-
sonnel when power is removed from the equip-
ment. Certain surfaces may remain hot to the
touch.
more detailled information and instructions are
required and available: Read the instruction
manuals.
Emerson Process Management GmbH & Co. OHG
ATEX Instruction Manual
ETC01035
02/2008