MLT 2 / BINOS
Flame Arrestor Installation
The analyzers may optionally be provided
with flame arrestors. Use the accompanying
short pipes, designed to allow up to 8 flame
arrestors to be installed to each instrument.
When installing optional flame arrestors take care to fix the tube fittings
for leak free installation!
Fittings not tight enough (especially those at the enclosure side of the
flame arrestors) may increase safety of the whole equipment and can cause
explosions!
Read and follow the accompanying flame arrestor´s instructions!
2-8
100 F
2.4.1 Instructions for Handling Flammable Gases
EXPLOSIONS HAZARD
ATEX Instruction Manual
Fig. 2-3: Single and installed 8 flame arrestors
Emerson Process Management GmbH & Co. OHG
ETC01035
02/2008