EN
4 - HANDLING AND INSTALLATION
4.4.6
Bar feeder fastening
WARNING - CAUTION:
failure to perform or a wrong bar feeder
fastening to the ground may be the
major cause of a bad operation of the bar
feeder and of its consequent damage.
•
Drill the floor and fix the backing plates with
expansion plugs. Use the higher number of
expansion plugs to ensure a correct fastening.
•
Check the levelling and alignment once more.
•
Remove all the equipment used for the levelling
and alignment phases and restore the initial bar
feeder conditions.
Master 80 UP HyperFlexible
4 - Pag. 16 / 16