Bar Feeder General Description - IEMCA Master 80 UP HyperFlexible Manual For Use And Maintenance

EN
2 - TECHNICAL INFORMATION Master 80 UP HyperFlexible
2.1

BAR FEEDER GENERAL DESCRIPTION

The MASTER 80 HF UP automatic bar feeder is used
in the machine-tool industry and in particular for
automatic lathe feeding.
The operating cycle is controlled by a PLC,
integrated in the electrical control panel, which is
able to communicate with the lathe control system.
The digital handheld keyboard makes programming
easier and allows the bar feeder functions to be
controlled without leaving the lathe.
The bar feeder can be used to feed bars, pipes and
various sections.
The guide channel is completely closed during
machining; a pump is provided to maintain a
continuous oil flow inside the guide channel,
creating a hydrodynamic support effect; these
features allow the bar to rotate at high r.p.m., with no vibrations and no surface damaging.
Thanks to the use of a "BRUSHLESS" and electronically controlled motor, the bar speed, torque
value and bar feeding position may be determined at any time during the working cycle.
The bar pusher returns with the machined bar remnant: the remnant is removed and dropped
onto the conveyor, which drops it onto the collection box.
The bar remnant ejection can be performed by the bar pusher feeding or next bar feeding.
The lathe tooling and maintenance can be easily carried out thanks to the axial displacement of
the bar feeder body.
2 - Pag. 2 / 2