General Bar Feeder Description - IEMCA SIR52 MS52 P Manual For Use And Maintenance

2 - TECHNICAL INFORMATION
2.2

GENERAL BAR FEEDER DESCRIPTION

The automatic bar feeder SIR52 MS32 P o SIR52 MS32 F, hereinafter referred to as the bar
feeder, works in the field of the machine tools, more specifically to feed a multi-spindle lathe
automatically.
The bar feeder has been designed to be installed instead of the lathe stock tube, thus replacing
the bar guiding and feeding systems. It allows round, hexagonal and square bars to be loaded.
The working cycle is controlled by a PLC fitted in the electric switchboard, able to dialogue with
the lathe control.
A LATHE
machines the bars loaded by the bar feeder.
B RACK MAGAZINE
stores the bars.
C CONVEYING DEVICE
takes single bars, moving them from the rack magazine to the inserting device.
D DRIVE
drives the bar traverse device from the rack to the inserting device.
E BUNDLE MAGAZINE
stores bars.
F BAR SELECTING DEVICE
selects bars.
G DRIVE
drives the bar selecting device.
2 - Pag. 3 / 14
SIR 52 MS52 P/F
EN