HAMPTON BAY METARIE II 24 Use And Care Manual page 15

Assembly — Installing the Light Kit (continued)
Installing the light bulbs and
13
plastic shade
CAUTION: Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
Install one 9 watt LED bulbs (EE) (included).
Position the notches (QQ) in the outer rim of the plastic
shade (J) so they line up with the tabs (RR) on the inside of
the rim on the light kit (I). Carefully lift the plastic shade (J)
up inside the light kit (I) and secure it to the fan by turning
the plastic shade (J) clockwise until snug. DO NOT
OVERTIGHTEN.
I
RR
EE
15
Please contact 1-855-HD-HAMPTON for further assistance.
QQ
J
HAMPTONBAY.COM