HAMPTON BAY METARIE II 24 Use And Care Manual page 12

Assembly — Hanging the Fan (continued)
7
Installing the canopy
WARNING: Make sure the tab on the mounting bracket (A)
properly sits in the groove in the hanger ball (D) before
attaching the canopy (B) to the mounting bracket (A) by
turning the canopy housing until it drops into place.
Make sure connections are neatly tucked into the ceiling
outlet box.
Slide the canopy (B) up to the mounting bracket (A) and
place the key hole on the canopy (B) over the loose canopy
mounting screws (GG) on the mounting bracket (A). Turn the
canopy (B) clockwise until it locks in place at the narrow
section of the key holes.
Align the circular hole on the canopy (B) with the remaining
hole on the mounting bracket (A), secure the canopy
mounting screws (GG) previously removed in the hole, and
tighten the two canopy mounting screws (GG).
GG
C
8
Outlet Box
A
B
GG
12
Attaching the canopy bottom cover
NOTE: Adjust the canopy mounting screws (GG) as
necessary until the canopy (B) and canopy bottom cover (C)
are snug.
Attach the canopy bottom cover (C) to the canopy mounting
screws (GG) heads on the bottom of the canopy (B) by
inserting the screw heads into the key slots in the canopy
bottom cover (C) and rotating it clockwise.
B
GG
C