Advertisement
5. The area underneath the discharge gate will need to be hosed off a few times a day. The discharge gate
mechanism is equipped with a wiper which continually sweeps debris off the safety grate, however, a shot
of water every now and then will ensure smooth discharge.
REMEMBER .....do not remover the discharge safety grate under any
circumstances.....keep this area clean and material discharge will be no problem...it is
not worth lost fingers and hands to remove the safety grate!
6. Do not disconnect the safety interlock system on the mixer drum safety grate. Should it begin to
malfunction see your IMER Distributor immediately, or call IMER U.S.A. direct at (800) 275-5463.
7. Regarding motor maintenance, please review the manufacturer's manual which is supplied with each
machine.
IT IS IMPORTANT that the mixer power plant run properly, or the material mixing action may not be
thorough enough. The motor is the heart of this machine........take care of it!
Advertisement
