Veris 3150 MSP3 Operating Instructions Manual page 79

5. The program will then ask you for a phone number. Instead of entering a phone number,
specify the proper serial port number. For example, if Com 1 of the laptop is being used,
specify "Direct to Com 1" under "connect using:" at the bottom of the entry area.
Figure 6.6
6. HyperTerminal will then display a configuration menu where you can specify 4800 bits per
second, 8 data bits, no parity, 1 stop bit and no flow control.
Figure 6.7
6-16
Pub. # OM20-MSP3-3D