Row Cleaner Adjustment - Veris 3150 MSP3 Operating Instructions Manual

Pub. # OM20-MSP3-3D
Adjust spring pressure on row unit as needed. Lift implement to reduce pressure on springs. Then
use supplied wrench with ratchet(Figure 29a) to move handle forward to reduce spring pressure
and back to increase.(Figure 29b) Additional weight may be required in hard soils. Reduce
pressure in rocky conditions to prevent damage to window.
Figure 29a Figure 29b

Row Cleaner Adjustment

The row cleaner needs to be adjusted for
your conditions, crop changes, and as
coulters and openers wear. Ideally, cleaners
contact only the trash, and do not disturb the
soil.
To adjust row cleaner loosen bolts, 1, and
slide the down stop, 2, to the desired
cleaning depth. Forward for deeper cleaning
1
and backward for shallower cleaning.
2
Figure 30
4-12