3-Point Adjustment; Row Unit Adjustment - Veris 3150 MSP3 Operating Instructions Manual

Pub. # OM20-MSP3-3D

3-point Adjustment

Turn the top link (Figure 27) to adjust the tilt and level
the unit. This is the optimal setting for all fields types.
Extending the top link will cause the rear of the unit to
move down. Shortening the top link will cause the
inverse.

Row Unit Adjustment

Adjust side depth wheels on optical row unit to allow deeper or shallower mapping. Using the
Adjusting Tool provided (Figure 28a) move (Figure 28b) backward for deeper depth. Depth wheels
should be snug, but freely moving, against the disks. See Section 5-3 for more information.
Figure 28a Figure 28b
4-11