Veris 3150 MSP3 Operating Instructions Manual page 29

Pub. # OM20-MSP3-3D
Log time is the longest time in seconds the pH controller will wait for the pH readings to settle. The
controller usually cycles before this maximum time is reached. The minimum setting for the log
time is 20 seconds. Press the up or down arrows adjust the sample time. (Tip: use 20 seconds
unless there is a special reason to allow a longer wait time)
Turning on the extra wash option will add 1.5 seconds of cleaning per cycle. The extra wash is
performed by automatically stopping the shoe briefly during the cycle. Use this feature if you have
noticed the electrodes are not cleaning during the cycle. Put a checkmark in the box to turn the
extra wash on and uncheck to turn off the extra wash. Tip: water usage will double if extra wash is
used.
4-8