Customs Union Eurasia (Optional); Touch Up Any Damaged Paintwork; Inspection And Maintenance; Safety Instructions For Inspection And Maintenance - Siemens SIMOTICS SD 1LE5 Operating Instructions Manual

Maintenance

9.2 Inspection and maintenance

9.1.2

Customs union Eurasia (optional)

When making changes or repairs, maintain the corresponding design standards! These
machines are labeled on the rating plate with the following markings.
9.1.3

Touch up any damaged paintwork

If the paint is damaged, it must be repaired in order to protect the unit against corrosion.
Note
Paint system
Contact the Service Center (Page 123) before you repair any damage to paint. They will
provide you with more information about the correct paint system and methods of repairing
paint damage.
9.2 Inspection and maintenance
9.2.1

Safety instructions for inspection and maintenance

Danger as a result of stationary parts under voltage (live parts)
Live parts represent a hazard. Touch protection against active (live) parts is no longer
guaranteed if covers are removed. The minimum air and creepage distances may be fallen
below (violated) when coming close to active parts. Touching or coming close can result in
death, serious injury or material damage.
• Take the machine out of operation.
• Switch off the machine and ensure that it is in a no-voltage condition. Carefully comply
with the "5 safety rules" (Page 11).
• Only open the terminal box when the motor is stationary and in a no voltage condition.
92
Customs union Eurasia
Eurasian customs union
1LE5, 1PC4 shaft height 315/355
Operating Instructions, 10/2020, A5E41454666A