Customs Union Eurasia (Optional); Inspection And Maintenance; Safety Instructions For Inspection And Maintenance; Safety Instructions In Operation - Risk Of Burn Injuries At Hot Surfaces - Siemens SIMOTICS SD Operating Instructions Manual

Maintenance
9.3 Inspection and maintenance
9.2.2

Customs union Eurasia (optional)

When making changes or repairs, maintain the corresponding design standards! These
machines are labeled on the rating plate with the following markings.
If the paint is damaged, it must be repaired in order to protect the unit against corrosion.
Note
Paint system
Contact the Service Center before you repair any damage to paint. They will provide you with
more information about the correct paint system and methods of repairing paint damage.
9.3

Inspection and maintenance

9.3.1

Safety instructions for inspection and maintenance

9.3.1.1

Safety instructions in operation - risk of burn injuries at hot surfaces

Risk of burn injuries as a result of hot surfaces
Individual machine parts can become hot in operation. Burns can result when coming into
contact with these parts.
• Never touch machine parts during operation.
• Allow the machine to cool down before starting work.
• Check the temperature of parts before touching them. If required, wear suitable protective
equipment.
Risk of injury due to rotating parts
Rotating parts are dangerous. Touch protection against rotating parts is no longer guaranteed
if covers are removed. Touching rotating parts can cause sparking with subsequent ignition of
an explosive atmosphere resulting in death, serious injury or material damage.
• Carefully ensure that all of the covers are closed while operational.
• First switch off and disconnect the machine if you must remove covers. Carefully comply with
the "5 safety rules (Page 19)".
• Only remove the covers when the rotating parts have come to a complete standstill.
98
Customs union Eurasia
Eurasian customs union
1LE5, 1PC4 shaft heights 280 ... 355
Operating Instructions, 11/2022, A5E41454666A