Blodgett KLT-100E Installation Operation & Maintenance page 6

ELECTRICAL CONNECTIONS
A Control Box with power supply equivalent to electrical rating of the kettle should be
located conveniently nearby.
1. Remove the wiring compartment cover and make electrical connections per wiring
diagram located inside the control housing cover panel. A waterproof electrical
connection from power supply to rear of control housing must be provided.
2. Kettle must be grounded in accordance with requirements of the National Electrical
Code or applicable local codes.
3. Ground kettle to terminal provided in control housing.
4. Once proper connections are made, replace wiring compartment cover, turn power
ON and check for proper operation.
SERVICE CONNECTIONS
All internal wiring for the kettle is complete.
If faucet is provided connect water supply and check for proper operation.
INSTALLATION CODES AND STANDARDS
Your electric tilting kettle must be installed in accordance with:
1. Provincial and local codes, or in the absence of local codes, with: C.S.A. C22.1
Canadian Electrical Code, Part 1, or in the U.S.A., the National Electrical Code
ANSI/NFPA-70 (latest edition).
2. ANSI NFPA Standard #96, "Vapor Removal from Cooking Equipment," (latest
edition), available from the National Fire Protection Association, Batterymarch Park,
Quincy, MA, 02269.
6