Service Connections - Blodgett KCH-30DS Installation Operation & Maintenance

1.0 SERVICE CONNECTIONS

ELECTRICAL CONNECTION: (Tilt models only) 1/2" conduit connection to controls. Unless otherwise specified, Field Wire Electrical Connection to be 120
Volts, 60 Hertz single phase 10 Amps with grounding wire.
DRAIN: 5/8 O.D. tubing to open floor drain. No Solid Connection.
STEAM SUPPLY: 3/4" IPS for incoming steam. Min 5 PSI(34 kPa), MAX 30 PSI(207 kPa), 45 PSI (310 kPa) optional.
S
Important: Pressure reducing valve required if incoming steam pressure exceeds the kettle rating.
COLD WATER: 3/8" O.D. Tubing to faucet.
HOT WATER: 3/8" O.D. tubing to faucet.
MODEL CAPACITY UNITS
3O gallons inches
KCH-30DS
114 litres mm
40 gallons inches
KCH-40DS
151 litres mm
60 gallons inches
KCH-60DS
227 litres mm
B
ØA
S
3.25 [83]
6 [152]
S
18.5 [470]
SEE NOTE
S
DIMENSIONS
A B
24 36
610 914
26 36
660 914
29.5 42
749 1067
DIMENSIONS ARE IN INCHES [MM].
3.25 [83]
S
NOTE: Area for kettle draw off
must be kept free of all piping connections.
C D
16 39 37.25
406 991 946
15 40 38.38
381 1016 975
16 43 41.12
406 1092 1045
C D
4
E F G
41.5 65.25
1054 1657
42.5 68.25
1080 1733
47.62 74.25
1210 1886
FLANGED FOOT DETAIL
2 EQUALLY SPACED
Ø 7/16" [11mm] HOLES
ON 2.5 [63] B.C.