Martin M3776UK Operator's Manual page 4

1.1.4
1.1.5
© Martin Engineering GmbH
and/or other rights of third parties outside the Federal Republic of Germa-
ny.
We are not liable for damage resulting from improper operation not in com-
pliance with these instructions. We are not liable for lost profit and conse-
quential losses resulting from non-compliance with safety instructions and
warnings. We do not accept any liability for damage resulting from the use
of accessories and/or spare parts, which have not been supplied and/or cer-
tified by Martin Engineering GmbH.
The products of Martin Engineering GmbH are designed for a long service
life. They comply with the current state of science and technology and were
checked thoroughly prior to delivery. Martin Engineering GmbH constant-
ly carries out product and market surveys for the continuous further deve-
lopment of the products.
In the event that malfunctions and/or technical problems occur, please
speak to the service department at Martin Engineering GmbH. We guaran-
tee to implement suitable measures immediately. The guarantee provisions
of Martin Engineering GmbH apply; we will gladly send these to you on
request.
Intended use
The MARTIN ® MultiPort Controller control systems are used for control-
ling one MARTIN ® MultiPort air cannon with a maximum of 8 output
points and one pressure reservoir.
Every other use of the MARTIN
intended. If you wish to use the MultiPort Controller for a different purpo-
se, please contact MARTIN's service department. We would be pleased to
help you with the product configuration.
Proper disposal
Assemblys or parts of the MARTIN
sed appropriately after use, as follows.
• Complete assemblys must be disposed seperately according to
material type.
All national and international disposal regulations must be followed for
proper disposal.
® Air Cannon Controller is not regarded as
® MultiPort Controller must be dispo-
4 M3776UK-05/10