Martin M3776UK Operator's Manual page 27

EU manufacturer's declaration according to EU - Machinery Directive
(2006/42/EC) Appendix II B for machine components
We
hereby declare that the machine/partial machine/machine parts identified below
designation of the machine/partial machine/machine parts:
make/ type:
with the serial no.:
comply with the following conditions:
Applied harmonised standards are in particular:
DIN EN 50178 - Electronic equipment for use in power installations
DIN EN 60529 - Degrees of protection provided by enclosures (IP-Code)
DIN EN 60204-1 - Electrical equipment of machines (Industry)
DIN EN 60439-1 - Low-voltage switchgear and controlgear assemblies
Notified body:
The original version of the operating instructions and the technical documentation belonging to the
machine are attached to the designated machine/partial machine/machine part.
The initial operation of these machine components is prohibited until it has been determined that the
system into which they are to be installed, complies with the provisions of the EU Directive version
(2006/42/EC).
Date: 05.01.2010
Manufacturer - Signature: Managing Director, Michael Hengl
© Martin Engineering GmbH
Martin Engineering GmbH
In der Rehbach 14
D-65396 Walluf
Air Cannon Controller
®
MARTIN MultiPort Controller
not required
EG - Low Voltage Guideline 73/23/EEC
EU - EMC Directive 89/336 EEC
not required
27
phone +49 (0)6123-97820
fax +49 (0)6123-75533
M3776UK-05/10