Procedure For Tilting Up (Power Trim And Tilt Models) - Yamaha VF90 Owner's Manual

Operation
EWM01544
WARNING
Make sure that all people are clear of the
outboard motor when tilting the outboard
motor up and down. Body parts can be
crushed between the outboard motor and
the clamp bracket when the outboard mo-
tor is trimmed or tilted.
ECM00993
NOTICE
 Before tilting the outboard motor, follow
the procedure under "Stopping engine"
in this chapter. Never tilt the outboard
motor while the engine is running. Se-
vere damage from overheating can re-
sult.
 To prevent the cooling water passages
from becoming frozen when the ambi-
ent temperature is 5°C (41°F) or below,
tilt the outboard motor up after it has
been stopped 30 seconds or more.
EMU44640
Procedure for tilting up (power trim
and tilt models)
1. Place the remote control lever in neutral.
58
N
ZMU07034
2. Press the power trim and tilt switch "
(up) until the outboard motor has tilted
up completely.
1
UP
1. Power trim and tilt switch
UP
1. Power trim and tilt switch
3. Pull the tilt support lever toward you to
support the engine. WARNING! After
tilting the outboard motor, be sure to
support it with the tilt support knob or
tilt support lever. Otherwise the out-
board motor could fall back down
N
ZMU06926
ZMU06986
1
ZMU08693
"