Anti-Fouling Paint; Outboard Motor Disposal Requirements; Emergency Equipment; Emission Control Information - Yamaha VF90 Owner's Manual

Specifications and requirements
EMU41354

Anti-fouling paint

A clean hull is required to maintain your
boat's performance. Boats moored in the wa-
ter should be protected from marine growth
(barnacles, mussels, and marine plants). If
approved by regulations for your area, the
bottom of the hull can be coated with an anti-
fouling paint to inhibit marine growth.
Anti-fouling paints specifically formulated for
use on aluminum may be applied to the out-
board motor. The original Yamaha paint sur-
face may be scuffed lightly before applying
anti-fouling paint, but do not remove the orig-
inal paint. Removal of the original paint will in-
crease the rate of corrosion.
ECM04821
NOTICE
 Anti-fouling paint for fiberglass and
wood may contain materials, such as
copper, graphite, and tin, that can cause
corrosion if applied to aluminum boats
and outboard motor components. Never
apply these types of paint to your out-
board motor because rapid corrosion
damage could occur.
 Anti-fouling paint can increase drag
(friction) between the boat and the wa-
ter, and possibly affect performance. If
the effects are too great, reducing pro-
peller pitch may be necessary.
Sacrificial anodes are attached to the out-
board motor to provide corrosion protection
and must never be painted.
Sacrificial anodes made from a different ma-
terial may be necessary for maximum corro-
sion protection due to your local water
conditions. Please consult your Yamaha
dealer.
20
ECM02421
NOTICE
Painted sacrificial anodes will not provide
corrosion protection.
EMU40302
Outboard motor disposal re-
quirements
Never illegally discard (dump) the outboard
motor. Yamaha recommends consulting the
dealer about discarding the outboard motor.
EMU36353

Emergency equipment

Keep the following items onboard in case
there is trouble with the outboard motor.
 A tool kit with assorted screwdrivers, pliers,
wrenches (including metric sizes), and
electrical tape.
 Waterproof flashlight with extra batteries.
 An extra engine shut-off cord (lanyard) with
clip.
 Spare parts, such as an extra set of spark
plugs.
Consult your Yamaha dealer for details.
EMU25223

Emission control information

EMU25232
This engine conforms to U.S. Environmental
Protection Agency (EPA) regulations for ma-
rine SI engines. See the label affixed to your
engine for details.
EMU31563
Approval label of emission control certifi-
cate
This label is attached at the location shown.
New Technology; (4-stroke) MFI