Vinten Vision 5LF Maintenance Manual page 33

Contents
First Previous Next Previous
Page Page Page View
15.9 Insert platform slide (1) into the rear end of the platform dovetails, check that it is retained at the
front end by the dowel pin and at the back end by the slide release.
15.10 Apply white bearing grease to the threads of clamp screw (3) and screw it into the lug on the RH
side of the platform to clamp the platform slide.
15.11 Degrease grub screw (5), apply Loctite 222E to the threads and install in knob (4). Fit knob (4) on
the hexagonal part of clamp screw (3) so that the platform slide is clamped when the arm points
vertically downwards and is free when the knob is turned counter-clockwise to the stop. Tighten grub
screw (5) to secure the knob.
33