Table of Contents
Advertisement
Contents
Contents
General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
General
1
To identify components, please refer to
LF Pan and Tilt Heads Operators Guide, Publication Part No. 3390-8.
Installing the head on a tripod
2
The Vision 5LF head is supplied with a 100 mm ball base and is designed for installation on a
compatible Vinten Vision tripod.
3
Adaptors are available which enable the heads to be installed on tripods or pedestals fitted with other
mountings.
4
To install the head, remove the bowl clamp assembly
and refit the bowl clamp assembly from below. Level the head with the aid of the level bubble
the bowl clamp.
Mounting the camera
5
Remove the slide plate
release
(13)
and pulling the plate to the rear.
6
Attach the slide plate to the camera or camera mounting plate under the approximate centre of the
camera's weight using both fixing screws (5). Position the screws as far apart as possible.
7
Push the slide plate and camera into the track in the platform, ensuring slide release
position.
Installation and Operation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Fig
(6)
from the head by releasing the slide clamp (1), pressing the slide lock
Section 2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.1. For further operating instructions, please refer to Vision
(7)
from the head, position the head on the tripod
First
Previous
Next
Page
Page
Page
(4)
and tighten
(13)
snaps into
Previous
View
Para
14
Hide quick links:
Advertisement
Chapters
Table of Contents
