Advertisement
1. Turn the scooter off. Open the charge port rubber protective cover and securely plug
the charger into the charge port.
2. Plug the charger into the power outlet.
3. A solid red light on the charger indicates the battery is charging. A solid green light
indicates the battery is fully charged.
4.
charging socket. Secure the charge port rubber protective cover.
USAGE:
1. You will not damage the battery by riding the scooter until the battery is fully
discharged and the scooter motor shuts down.
2. Avoid operating the scooter when the battery is hot.
INDICATOR
1. The battery level indicator lights are on the power switch control. When the scooter is turned
on, the battery level indicator is on.
2. 3 lights means the scooter is at least 50% charged. Less lights indicates the battery is
approaching empty.
3. The battery level indicator is accurate when the motor is
standing still, check the battery level indicator for battery capacity status. Do not check the
battery indicator when operating the scooter.
4.
speed it shuts down. This occurs because under full speed, a large instant current causes the
voltage to drop in the battery reaching the controller stop limit to protect the battery and
shutting down the scooter. When this happens, turn the scooter back on and drive the scooter
under low speed until you can recharge the battery.
WARNING:
exceede
and discoloration are signs of stress-caused fatigue and indicate that a
part is at the end of its useful life and needs to be replaced. While the
06/15/21
CHARGING:
Condition. When
engaged. When the scooter is
at lower speed but under full
Scratches, cracks, fraying
29
Advertisement
