Advertisement
Take the scooter frame out of box.
Step 1: Stand scooter up vertically on its 2 rear wheels and rear bumper (Vertical Self Standing
Position) for easy access before installing the foot pedals. You can find 3 bolt holes on each side of
the flanges at the bottom of the neck shown below. Foot pedals are bolted onto the flanges. Please
note: there are 2 settings for each foot pedals. The factory default is BACKWARD position. If you
prefer to extend your feet more forward while riding, you can adjust to FORWARD position by re-
bolting the foot pedals to the supporting beams.
Vertical Self Standing
Step 2: Using the wrench, bolts and washers provided, attache the foot pedals to the flanges with
the flat washer against the scooter frame and the lock washer between the flat washer and the bolt
head.
06/15/21
Bolt holes for
foot pedal
attachment
10
Backward
Position
Forward
Position
Advertisement
