Download Print this page

Glion SNAPnGO 335 User Manual page 22

Hide thumbs Also See for SNAPnGO 335:

Advertisement

Just like learning to drive a car or ride a bicycle, operating any personal transportation device
inherently includes risk and takes practice. Therefore, use caution as you practice operating the
scooter in various situations. Keep the speed at
controlling the scooter. The below instructions and practice steps will teach you to maneuver
through doorways, on and off lifts, and up and down ramps.
When preparing for your first ride, select an area that is flat, spacious, and away from traffic and
other obstacles. Bring a friend along to help you follow the instructions while you practice. Start
driving with the lowest speed. Please refer to the Overview section of this Manual for instructions
s three speeds.
:
1. Fully charge the battery. For safety reasons, the battery is only 50% charged when
shipped from the factory (See Battery Charging Instructions Below).
2. Choose a controlled environment away from vehicles, obstacles, and other hazards for
riding.
etc.
3. Always check and obey all local laws and regulations. Your insurance policies may or
may not provide coverage for accidents involving the use of this motorized scooter.
To determine if coverage is provided, check with your insurance company or agent.
Do not assume your existing insurance policies provide coverage.
4. Unfold the scooter (See Unfolding Instructions above).
5. Complete a final roadworthiness safety check before operation.
a. Make sure folding mechanism, dolly handle, wheel lug nuts, other nuts, bolts,
fasteners, etc., are secure.
b. Inspect the frame, fork and handlebars for cracks or broken connections.
Ri
1. Install foot pedals, the deluxe seat or travel seat onto the scooter frame. Sit on the seat
with both feet rested on the foot pedals.
2. Press the on/off button on the right handle once to turn on the scooter. The LED in the
center of handlebar should be lit when the scooter is turned on. Make sure the speed
setting is 1 and reverse control is set at F for forward mode.
3. With both hands on the handlebar and eyes looking forward, press the right thumb
throttle to move forward
4.
As the motor begins to slowly propel the scooter forward, practice braking by letting go
the right thumb throttle or actuate the left hand brake. The scooter should come to a
stop.
06/15/21
SNAPnGO ELECTRI SCOOTER
Powered
21

Advertisement

loading