Advertisement
Your SNAPnGO scooter comes with a 2-Level parking brake design. Level 2 is tighter than level 1.
Each electric scooter is equipped with a lithium battery and a smart charger designed specifically
for each other.
Do not charge the battery with any other charging system. If the battery or
charger is damaged due to improper use, the limited manufacturer warranty shall be void. Do not
operate the charger near flammable materials such as carpet. Ensure a dry environment. Never
allow the charger or cable to come into contact with water as this may result in electric shock.
Never touch the charger or cable with wet hands. Disconnect the charger from the outlet if any
fault arises during charging. Always pull the plug, not the cable. Do not allow the charger or
cables to be damaged or crushed by sharp edges or heat. The charger supplied with the electric
scooter should be regularly examined for damage to the cord, plug, enclosure and other parts. In
the event of such damage, the scooter must not be charged until the charger has been repaired or
replaced. Unplug the charger and disconnect from the scooter when not in use. As a safety
06/15/21
Parking brake is NOT
actuated
Squeeze the brake handle and push
the stopper in. Parking brake is on
Squeeze the brake handle more and
push the stopper in. Parking brake is
on Gear 2. Gear 2 provides more
stopping power.
26
Advertisement
