Table of Contents
Advertisement
ThermShield MF(1 & 2) Installation Guide
CE Installation Method Overview
Rigid wall installation MF2 installation frame
Flexible wall installation MF2 installation frame
Shaft wall installation MF2 installation frame
Minmal seperation damper installation (square)
Rigid wall installation MF1/MF2 installation frame
Flexible wall installation MF1/MF2 installation frame
Shaft wall installation MF2 installation frame
Minmal seperation damper installation (circular)
• For full classifications please refer to our Declaration
of Performance (DoP), which can be found on our
website.
• The methods in this manual should be followed to
ensure a CE-marked installation.
• The instructions are based on the tested method using
Actionair ThermShield PTC fire/smoke dampers.
• Our ThermShield dampers are designed to be
used with fire separating elements to maintain fire
compartments. The ThermShield is an actuated failsafe
close damper with low smoke leakage, often referred
to in the industry as a Fire/Smoke damper.
• Under the Fire Damper Product standard BS EN 15650
our Fire Damper products are tested to BS EN 1366-2
and classified under BS EN 13501-3.
2
Swegon reserves the right to alter specifications.
Application
20210615 - L00014
Installation Method
Page 5
Page 6
Page 7
Page 8
Page 9
Page 11
Page 12
Page 13
Advertisement
Table of Contents
