Assa Abloy Corbin Russwin Access 700 ML20700 TCPWI1 Series Installation Instructions Manual page 7

ML20700 PWI/PIP Series Mortise Lock
3. Handing of Lock Body
a. Push in latch while gently pushing on catch plate with screwdriver (Fig. 3a).
b. Release latch and remove from lock body.
c. Turn over latch and re-install in lock body; Be sure anti-friction latch tail hooks into front (Fig. 3c).
d. Hold screwdriver behind tail socket while pushing in latch. Push latch until 'click' is heard (Fig. 3b).
Note: Pull on latch to make sure it is secure.
e. Rotate lock front to match bevel of door by inserting screwdriver into lock mounting holes
and twisting (Fig. 3d).
Copyright © 2015 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
5) Installation Instructions (Continued)
Fig. 3a
Move the RED-HEADED screw to
the Locking Side of the door
Anti-friction Latch 0Tail
Fig. 3c
7
Fig. 3b
Lock Front
Fig. 3d