Assa Abloy Corbin Russwin Access 700 ML20700 TCPWI1 Series Installation Instructions Manual page 15

ML20700 PWI/PIP Series Mortise Lock
9. Install (optional) Weatherseal Gasket:
For non-fire rated door applications, an optional gasket may be
used as a weatherseal between the escutcheon and the
outside door surface.
Peel off the adhesive backing on the gasket and
install the gasket along the edge of the outside
escutcheon assembly (Fig. 9).
10. Install Outside Escutcheon
1. Insert the mounting posts through holes as shown
in (Fig. 9a).
2. On the inside of the door, position the mounting plate
over the indicated holes (Fig. 10a).
3. Feed reader cable through central opening of mounting
plate (Fig. 10a).
Lockbody cable feeds from bottom (Fig. 10a, b).
Ensure ground lug is positioned upright (Fig. 10a, b).
4. Insert other three #8-32 x 1-7/8" flat head machine
screws and tighten, fastening the outside
escutcheon to the door (Fig. 8B).
Mounting Plate
Fig. 10b
Copyright © 2015 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
Position
Lock body ground ring
cable terminal
upright, then
tighten screw.
Weatherseal Gasket
Outside Escutcheon
15
Fig. 9
Fig. 10a