Siemens SENTRON PAC2200CLP Product Manual page 90

Technical specifications
8.1 Technical specifications
• Use of the communications interfaces
The communications interfaces of the counters are not in conformance with statutory
calibration regulations. Measured values of the counters to be approved here which are
read out over these interfaces can only be used for billing purposes insofar as, in
accordance with Annex 2, Paragraph 8.1 of the Metering and Calibration Act, they
constitute an unchanged repetition of the measurement results shown on the display of
the counters to be approved here.
• Logbook function
The counters described here always feature a calibration logbook which can only be
deleted if the access protection provided by the manufacturer is impaired.
88
Equipment Manual, 06/2021, L1V30820585B-02
PAC2200CLP