Table of Contents
Advertisement
Technical specifications
8.1 Technical specifications
– Data interfaces (Ethernet) as well as digital inputs and outputs
– Apparent energy
– Reactive energy
– Instantaneous values (voltage, current, apparent power, active power, reactive power,
– Switching between tariffs
– Password protection and hardware write protection
– Reset function
– Load profile values (daily, monthly, annual values)
– Calculation of average values for active and reactive power of the last completed
Functions in conformance with statutory calibration regulations according to PTB-A 50.7:
– Logbook
– Load profile (energy feeds, 15-minute values, import and export)
– Date/time
– Transformer factor settings
• Applied directives and standards can be found in the EU Declaration of Conformity
(https://support.industry.siemens.com/cs/ww/en/ps/7KM2200-2EA00-1JB1/cert).
You can download the relevant certificates from the Siemens Support website
(https://support.industry.siemens.com/cs/ww/en/ps).
• DE Declaration of Conformity
DE MTP 20 B 003 M National approval of the load profile according to PTB-A50.7.
• Notes on proper metering
Requirements for the user as per § 23 of the German Metering and Calibration Act
(MessEV)
Under the Metering and Calibration Act, parties constituting users of a metering device as
per the statutory calibration regulations must perform metering and must handle
metering devices such that proper metering is guaranteed.
• Users as per the statutory calibration regulations with consideration of the ruling of
market roles by the Metering Point Operation Act include:
– Metering device users:
– Measured value users:
It is the task of the metering device users to make it possible for the measured value users
to familiarize themselves with the requirements described below.
86
power factors, frequency, totals)
demand period for import and export
Metering device users are the metering point operators as per the Metering Point
Operation Act.
Measured value users are parties who perform metering and who transmit measured
values onto authorized third parties as per the Metering Point Operation Act, as well as
those who are responsible for the billing of network utilization and energy supply.
Equipment Manual, 06/2021, L1V30820585B-02
PAC2200CLP
Advertisement
Table of Contents
