Safety Instructions; About This Chapter; Intended Use - Bosch Rexroth AGEV1-48404-AA/HM/L01H01-XC Operating Instructions Manual

2 Safety instructions

2.1 About this chapter

Manifolds from Bosch Rexroth are manufactured according to good engineering
practice. However, there is still a risk of personal injury and damage to property.
Therefore, observe this chapter and the safety instructions in this documentation.
▶ Read this documentation completely and thoroughly before working with
manifolds.
▶ Keep this documentation in a location where it is accessible to all users at all
times.
▶ Always include the required documentation when you pass the product on to
third parties.

2.2 Intended use

The product is a hydraulic system component. The manifold block is intended for use
in industrial machines and systems.
You may use the product as follows:
• For controlling the motion in machines and systems in a potentially explosive
atmosphere.
• While adhering to the operating and ambient conditions according to the data
sheet.
• While adhering to the specified performance limits.
• In the original condition, without damage.
• Repairs by customers are not permitted.
The product is intended exclusively for professional use and not for private usage.
Operation according to the intended use also implies that you have read
and understood this documentation completely, especially chapter 2 "Safety
instructions".
The manifold block meets the requirements of ATEX Directive 2014/34/EU.
Details on the equipment group, category and temperature class/surface
temperature according to ATEX Directive 2014/34/EU can be found on the nameplate
of the manifold block and in chapter 15 "Technical data".
The manifold block may only be operated in a technically perfect condition and used
as described in these operating instructions. The connection conditions, application
conditions and performance data defined in these operating instructions must not
be changed.
If you intend to use the manifold block with connection, application or performance
data other than those defined by Bosch Rexroth AG in these operating instructions,
please contact Bosch Rexroth AG beforehand. The manifold block must not be used
with connection, application and performance data other than those defined in these
operating instructions without the written consent by Bosch Rexroth AG.
Use according to the intended purpose includes the operation in an environment, in
which, due to highly charge-generating processes, propagating brush discharges may
occur on the surface of the manifold block.
RE 62272-B/03.19, Manifold block type AGEV1-48404-AA/HM/L01H01-XC, Bosch Rexroth AG
Safety instructions 9/40