Symbols; Abbreviations Used - Bosch Rexroth AGEV1-48404-AA/HM/L01H01-XC Operating Instructions Manual

8/40 About this documentation
Bosch Rexroth AG, Manifold block type AGEV1-48404-AA/HM/L01H01-XC, RE 62272-B/03.19
Safety instructions are structured as follows:
Type and source of danger!
Consequences in case of non-compliance
▶ Hazard avoidance measures
▶ <Enumeration>
• Warning symbol: draws attention to a hazard
• Signal word: identifies the degree of hazard
• Type and source of danger!: specifies the type and source of hazard
• Consequences: describes the consequences in case of non-observance
• Precaution: specifies how the hazardous situation can be prevented
Tabelle 2: Hazard classifications according to ANSI Z535.6-2011
Warning sign, signal word
DANGER
WARNING
CAUTION
NOTICE

1.1.2 Symbols

The following symbols indicate notices which are not safety-relevant but increase the
comprehensibility of the documentation.
Tabelle 3: Meaning of the symbols
Symbol Meaning
If this information is disregarded, the product cannot be used or operated
in an optimum manner.
▶ Individual, independent action
1.
Numbered instruction:
The numbers indicate that the actions must be carried out one after the
2.
other.
3.

1.1.3 Abbreviations used

The following abbreviations are used in this documentation:
Tabelle 4: Abbreviations
Abbreviation Meaning
ANSI American National Standards Institute
ATEX EU Directive for explosion protection (Atmosphère explosible)
EN European Standard
ISO International Organization for Standardization
IEC International Electrotechnical Commission
RE Rexroth document
SIGNAL WORD
Meaning
Indicates a hazardous situation which, if not avoided, will
certainly result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
Damage to property: The product or the environment could
be damaged.