About This Documentation; Validity Of The Documentation; Required And Supplementary Documentation; Representation Of Information - Bosch Rexroth AGEV1-48404-AA/HM/L01H01-XC Operating Instructions Manual

1 About this documentation

1.1 Validity of the documentation

This documentation is valid for the following products:
• Manifolds for industrial applications in a potentially explosive atmosphere
Type AGEV1-48404-AA/HM/L01H01-XC (R920066219)
This documentation is intended for fitters, operators, machine and system
manufacturers.
This documentation contains important information on the safe and proper
transport, mounting, commissioning, operation, use, maintenance, demounting,
simple troubleshooting and waste disposal of the product.
▶ Read this documentation thoroughly, especially Chapter 2 "Safety instructions"
and Chapter 3 "General notes on damage to property and damage to the
product", before working with manifolds.

1.2 Required and supplementary documentation

▶ The product must not be commissioned until you have been provided with the
documentation marked with the book symbol
observed it.
Tabelle 1: Required and supplementary documentation
Title
Order confirmation
Installation drawing
Bill of material
General product information on
hydraulic products
Pressure relief valve, direct
operated, type DBD
Check valve, pilot operated, type SV
and SL
Counterbalance valve
Type CWCG-LGN/LH
EU declaration of conformity
according to ATEX Directive
2014/34/EU

1.3 Representation of information

In order to allow you to work directly and safely with your product, standardized
safety notes, symbols, terms and abbreviations are used. For a better understanding,
they are explained in the following sections.

1.1.1 Safety instructions

This documentation contains safety notes in chapter 2.6 "Product-specific safety
instructions" and chapter 3 "General notes on damage to material and the product"
as well as before a sequence of activities or instructions for action, which involve
the risk of personal injury or damage to equipment. The hazard avoidance measures
described must be observed.
RE 62272-B/03.19, Manifold block type AGEV1-48404-AA/HM/L01H01-XC, Bosch Rexroth AG
About this documentation
and you have understood and
Document number Type of document
RA72789520 Drawing
R920066219 Parts list
07008 Instructions
25402 Data sheet
21468 Data sheet
Data sheet, SUN
Declaration of conformity
7/40