AR-723 (H) Access Controller V200620 About Master Card MASTER CARD Setting for Stand-Alone AR-723 (H) RS485 Converter 321CM Use the MASTER CARD software 323DMaster Input the MASTER CARD number, and press [Write]. Cut off and then transmit the power, the master card number will be activated.
SOYAL ® AR-723 (H) Access Controller V200620 D. Setting Up the Arming [Only for connect to external K-series reader] Alarm conditions: Application: 1. Door open too long: Door is open longer than door relay time plus door close time. 1. Arming is enabled 2.Alarm system connected...
AR-723 (H) Access Controller V200620 Command List Function Command Description Mode PPPPPP M4/M6/M8 Entering programming mode PPPPPP=Master Code, default value=123456 M4/M6/M8 Exiting programming mode M4/M8 Exiting programming mode and enabling arming status M4/M8 Node ID setting (Connecting to 716E NNN=Node ID, range: 001~254...
Page 5
SOYAL ® AR-723 (H) Access Controller V200620 FCC ID: 2ACLEAR-723H This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the AR-723 and is the answer not in the manual?
Questions and answers