Toyota IS300h Manual page 59

 AUTO CONNECTION MODE
To turn auto connection mode on, set
"Bluetooth* power" to on. (P.63)
Leave the Bluetooth
cation where the connection can be
established.
 When the engine <power> switch is in
ACCESSORY
<ON> mode, the system searches for a
nearby registered device.
 The system will connect with the regis-
tered device that was last connected, if
it is nearby.
 CONNECTING MANUALLY
When the auto connection has failed
or "Bluetooth* power" is turned off,
it is necessary to connect Bluetooth
manually.
1
Press the "MENU" button on the
Remote Touch and select "Setup".
2
Select "Bluetooth*".
3
Follow the steps in "CONNECTING
A Bluetooth
"STEP 1". (P.58)
*:Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
IS300h/250_Navi_EE
®
device in a lo-
or IGNITION ON
®
®
DEVICE" from
2. NETWORK SETTINGS
 RECONNECTING
®
tooth PHONE
®
If a Bluetooth phone is disconnect-
ed due to poor reception from the
®
Bluetooth network when the engine
<power> switch is in ACCESSORY
or IGNITION ON <ON> mode, the
system automatically reconnects the
®
Bluetooth phone.
®
 If a Bluetooth phone is disconnected
on purpose, such as turning it off, this
does not happen. Reconnect the Blue-
®
tooth phone manually.
THE Blue-
2
59