Toyota IS300h Manual page 390

3
Close the console box.
4
Display the "My memory" screen.
(P.385)
5
Select "Copy from USB".
 If a password has already been set,
enter the password. For instructions on
setting a password: P.166
IS300h/250_Navi_EE
1. CONNECTED SERVICES
 If there are multiple memory points
stored on the USB memory, select the
memory points and routes to be copied
and select "Start".
6
Check that a progress bar is being
displayed while the data copy is in
progress.
 To cancel this function, select "Can-
cel".
7
Check that a confirmation screen is
displayed when the operation is
complete.
8
387