Toyota IS300h Manual page 170

5. SETUP
AVERAGE SPEED
The speed that is used for the calcu-
lation of the estimated travel time
and estimated arrival time can be set.
1
Display the "Navigation settings"
screen. (P.168)
2
Select "Average speed".
3
Select " " or " " to set the average
vehicle speeds for "Urban road",
"Country road" and "Motorway".
"Default": Select to set the default
speeds.
"Consider traffic info": Select to set use
settings based on traffic information.
INFORMATION
The displayed time to the destination

is the approximate driving time that is
calculated based on the selected
speeds and the actual position along
the guidance route.
The time shown on the screen may

vary greatly depending on progress
along the route, which may be
affected by conditions such as traffic
jams and construction work.
170
IS300h/250_Navi_EE
POI CATEGORY CHANGE
(SELECT POI ICONS)
Up to 6 POI icons, which are used for
selecting POIs on the map screen,
can be selected as favourites.
1
Display the "Navigation settings"
screen. (P.168)
2
Select "Select POI icons".
3
Select the category to be changed.
"Default": Select to set the default cate-
gories.
4
Select the desired category.
"List all categories": Select to display
all POI categories.
5
Select the desired POI icon.