1. BASIC OPERATION
REGISTERING THE CURSOR
LOCATION AS AN AREA TO
AVOID
A specific location on the map
screen can be set as an area to avoid
using the scroll function.
1
Select "Avoid".
2
Select either
change the size of the area to be
avoided and select "OK".
100
IS300h/250_Navi_EE
INFORMATION
If a destination is entered in the area
to avoid or the route calculation can-
not be made without running through
the area to avoid, a route passing
through the area to be avoided may be
shown.
Up to 10 locations can be registered
as areas to avoid.
or
to