1. LEXUS PARKING ASSIST MONITOR
6. THINGS YOU SHOULD KNOW
IF YOU NOTICE ANY SYMPTOMS
If you notice any of the following symptoms, refer to the likely cause and the
solution, and re-check.
If the symptom is not resolved by the solution, have the vehicle inspected by
any authorized Lexus dealer or repairer, or another duly qualified and equipped
professional.
Symptom
The image is difficult to see
The image is blurry
The image is out of align-
ment
IS300h/250_Navi_EE
Likely cause
The vehicle is in a dark
area
The temperature around
the lens is either high or
low
The outside temperature
is low
There are water droplets
on the camera
It is raining or humid
Foreign matter (mud etc.)
is adhering to the camera
Sunlight or headlights are
shining directly into the
camera
The vehicle is under fluo-
rescent lights, sodium
lights, mercury lights etc.
Dirt or foreign matter (such
as water droplets, snow,
mud etc.) is adhering to the
camera.
The camera or surrounding
area has received a strong
impact.
Solution
Back up while visually
checking the vehicle's sur-
roundings. (Use the moni-
tor again once conditions
have been improved.)
The procedure for adjusting
the picture quality of the
parking assist monitor is
the same as the procedure
for adjusting the navigation
screen. (P.45)
Rinse the camera lens with
water and wipe it clean
with a soft cloth.
Wash with a mild soap if
the dirt is stubborn.
Have the vehicle inspected
by any authorized Lexus
dealer or repairer, or anoth-
er
duly
qualified
and
equipped professional.
309
6