Toyota IS300h Manual page 275

INFORMATION
If the navigation system does not

respond or the confirmation screen
does not disappear, press the talk
switch and try again.
If a speech command cannot be rec-

ognized, voice guidance will say
"Pardon?" and speech command
reception will restart.
If a speech command cannot be rec-

ognized 2 consecutive times, the
speech command guidance system
will say "To restart voice recognition,
push the talk switch.". Then voice
recognition will be suspended.
The voice recognition prompt can be

set to on or off when "Voice prompts"
is selected. This setting can also be
changed on the "Voice settings"
screen. (P.82)
Voice guidance can be canceled by

setting voice prompts to off. Use this
setting when it is desirable to say a
command immediately after pressing
the talk switch and hearing a beep.
IS300h/250_Navi_EE
1. SPEECH COMMAND SYSTEM OPERATION
SPEECH COMMAND
EXAMPLE: SEARCHING
FOR A ROUTE TO YOUR
HOME
1
Press the talk switch.
2
Say "Go home" or select "Go
home".
 A confirmation screen will be dis-
played showing the recognition results.
3
Say "Yes" or select "Yes".
 The system starts searching for a route
to your home.
 When the speech command is recog-
nized, the map of the area around the
home address will be displayed and
route guidance to the home address will
begin.
 If a home address is not registered,
voice guidance will say "Your home
is not set.". Please try again after set-
ting a home location. (P.149)
5
275