Toyota IS300h Manual page 358

2. SETUP
TRANSFER CONTACTS
FROM TELEPHONE
Operation methods differ between
PBAP compatible and PBAP incom-
patible but
®
Bluetooth phones.
If your cellular phone is neither
PBAP nor OPP compatible, the con-
tacts cannot be transferred.
356
IS300h/250_Navi_EE
OPP compatible
 FOR PBAP COMPATIBLE
®
Bluetooth PHONES
When "Automatic contact/history
transfer" is set to on (P.351)
1
Select "Transfer contacts".
 Contacts are transferred automatically.
2
Check that a confirmation screen is
displayed when the operation is
complete.
 This operation may be unnecessary
depending on the type of cellular
phone.
 Depending on the type of cellular
phone, OBEX authentication may be
required when transferring contact data.
Enter "1234" into the Bluetooth
phone.
®
 If another Bluetooth
nected when transferring contact data,
depending on the telephone, the con-
®
nected Bluetooth device may need to
be disconnected.
 Depending on the type of Bluetooth
phone being connected, it may be nec-
essary to perform additional steps on
the phone.
When "Automatic contact/history
transfer" is set to off (P.351)
1
Follow the steps in "FOR PBAP IN-
COMPATIBLE BUT OPP COM-
PATIBLE Bluetooth
from "STEP 1". (P.357)
®
device is con-
®
®
PHONES"