Toyota IS300h Manual page 344

1. TELEPHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
CHECKING MESSAGES
1
Display the "Messages" screen.
(P.340)
2
Select the desired message from the
list.
3
Check that the message is displayed.
No.
Select "Mark unread" or "Mark
read" to mark mail unread or read
on the message screen.
This function is available when
"Update message read status on
telephone" is set to on. (P.349)
Select to reply the message.
(P.343)
Select to display the previous or
next message.
Select to have messages read out.
To cancel this function, select
"Stop".
When "Automatic message read-
out" is set to on, messages will be
automatically read out. (P.349)
Select to make a call to the send-
er.
342
IS300h/250_Navi_EE
Function
INFORMATION
 Depending on the type of Bluetooth
phone being connected, it may be
necessary to perform additional steps
on the telephone.
 Messages are displayed
appropriate connected Bluetooth
phone's registered mail
folder. Select the tab of the desired
folder to be displayed.
 Only received messages on the
®
connected Bluetooth
displayed.
 Turn the Power/Volume knob, or use
the volume control switch on the
steering wheel to adjust the message
read out volume.
®
in the
®
address
phone can be