Table of Contents
Advertisement
MAINTENANCE GUIDELINES
DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE!
CLEANING
Frequent cleaning is recommended to ensure proper function and extended life. The frequency of
cleaning depends on the environment in which the device operates: damp, smoky, or particularly
dirty environments can cause greater accumulation of dirt on the device and air vents. Clean the
external surface regularly with a soft cloth to avoid dirt/debris accumulation.
NEVER use alcohol, solvents, or ammonia-based cleaners.
MAINTENANCE
Regular inspections are recommended to ensure proper function and extended life. There are no
user serviceable parts inside this device. Please refer all other service issues to an authorized Elation
service technician. Should you need any spare parts, please order genuine parts from your local
Elation dealer.
Please refer to the following points during routine inspections:
•
A detailed electrical check by an approved electrical engineer every three months, in order to
make sure the circuit contacts are in good condition and prevent overheating.
•
Be sure all screws and fasteners are securely tightened at all times. Loose screws may fall out
during normal operation, resulting in damage or injury as larger parts could fall.
•
Check for any deformations on the housing, rigging hardware, and rigging points (ceiling, sus-
pension, trussing). Deformations in the housing could allow for dust to enter into the device.
Damaged rigging points or unsecured rigging could cause the device to fall and seriously injure a
person(s).
•
Electrical power supply cables must not show any damage, material fatigue, or sediments.
NEVER remove the ground prong from the power cable.
8
Advertisement
Table of Contents
