Table of Contents
Advertisement
SYSTEM MENU
MODE
BUILT IN PROGRAM
MODE
SETUP OPTIONS
SOFTWARE VERSION
*SYSTEM RESET
ONLY QUALIFIED TECHNICIANS SHOULD PERFORM THIS FUNCTION. PLEASE
NOTE THAT ALL SAVED SETTINGS ARE ERASED AFTER A SYSTEM RESET IS
PERFORMED.
SET UP
UP/DOWN
Program Out x
Pixel Bar xxx IP
Pixel Bar Setup
Program Out x
xxx IP Number xx
Setup Options BLGT: On
LCD Backlight On/Off
Setup Options BLGT: Off
LCD Backlight Bright-
Setup Options BRCO: xxx
ness
System Reset*
Setup Options SysReset
Software Version
Port1 Vx.x
Software Version
Port2 Vx.x
Software Version
Display
Software Version
Port3 Vx.x
Software Version
Port4 Vx.x
17
DESCRIPTION
Select the pixel bar model that will
be connected to each output.
•
x = output port #
•
xxx = pixel bar model
Select the number of pixel bar units
that will be connected to each
output.
•
x = output port #
•
xx = number of units
•
xxx = pixel bar model
LED backlight always on.
LED backlight off after 20 seconds.
Adjust the brightness of the LCD
backlight
Reset the unit to factory settings.
Display software version of port 1.
Display software version of port 2.
Display software version of port 3.
Display software version of port 4.
Advertisement
Table of Contents
