Elation PIXEL DRIVER 4000 User Manual page 16

SYSTEM MENU
MODE
sACN MODE
KLINGNET & ARTNET
CONTROL MODE
BUILT IN PROGRAM
MODE
SET UP UP/DOWN
sACN Out x
DMX Universe Set
u:xxxxx
sACN Out x
Pixel Bar xxx IP
sACN Out x
Pixel Bar Setup
xxx IP Number xx
sACN Out x
xx X xx RGB Pixels
Klingnet enable or Klingnet & Artnet
disable set Klingnet: Enable/Disable
Klingnet Out x
Pixel Bar xxx IP
Klingnet Pixel Bar
Setup
Klingnet Out x
xxx IP Number xx
IP Address Out x
Artnet IP Address Set
xxx:xxx:xxx:xxx
Universe Out x
Artnet Universe Set
U:xxxxx
Programs
Program xx
Programs
Speed xx
Program Play Set
Programs
Fade xx
Programs
Phase Time xx
CONTINUED ON NEXT PAGE
16
DESCRIPTION
Set DMX universe of each output.
Select the pixel bar model that will
be connected to each output.
• x = output port #
• xxx = pixel bar model
Select the number of pixel bar units
that will be connected to each
output.
• x = output port #
• xx = number of units
• xxx = pixel bar model
Set RGB Channel mode, see Pixel
Modes section of this manual for
details.
Enable or disable the klingnet con-
trol.
Select the pixel bar model that will
be connected to each output.
• x = output port #
• xxx = pixel bar model
Select the number of pixel bar units
that will be connected to each
output.
• x = output port #
• xx = number of units
• xxx = pixel bar model
Set the IP address of each output.
Set the DMX universe of each out-
put.
Select the built in program.
Set the program speed.
Set the fade time speed.
Set the phase time.