Elation PIXEL DRIVER 4000 User Manual page 11

INSTALLATION GUIDELINES
RACK MOUNTING
The device can be rack mounted in a standard 19-inch rack space. Attach the included rack ears to
both sides of the device using the included screws. Tighten rack ear screws securely but do NOT over
tighten. Use careful planning when rack mounting the device to allow ample space for the power/data
cables.
TRUSS MOUNTING
The device can be attached to truss or a like structure using an appropriated truss clamp (not included)
and an M10 screw (not included).
RIGGING
Overhead rigging requires extensive experience, including calculating working load limits, installation
material being used, and periodic safety inspection of all installation material and the device, among
other requirements. If you lack these qualifications, do not attempt the installation yourself. Improper
installation can result in bodily injury.
INSTALLATION LOCATION PLANNING
Use careful planning to select the installation location of the PIXEL DRIVER 4000 unit(s). The maximum
distance from the driver to the first pixel bar should not exceed 50 feet (18m).
ALWAYS ATTACH A SAFETY
CABLE TO THE SAFETY CABLE
LOOP ON THE BACK OF THE
DEVICE WHENEVER INSTALLING
THIS DEVICE IN A SUSPENDED
ENVIRONMENT TO ENSURE THE
FIXTURE WILL NOT DROP IF THE
11
SAFETY CABLE
CLAMP FAILS.