Related Manuals for Miele WXI 860 WCS
Summary of Contents for Miele WXI 860 WCS
- Page 1 Operating and Installation Instructions Washer To prevent accidents and appliance damage, read these instructions before installation or use. en-US M.-Nr. 11 622 880...
-
Page 2: Table Of Contents
Before using for the first time ................15 Miele@home ......................16 1. Setting the display text..................17 2. Setting up Miele@home .................. 17 3. Removing the shipping struts ................. 18 4. Commissioning TwinDos ................. 18 Determining the water hardness ..............18 5. - Page 3 Changing a program (safety lock) ............... 57 Interrupting a program..................57 Canceling a program ................... 57 Detergent ......................58 Detergents recommended by Miele ..............58 General detergent recommendations..............59 Cleaning and care ..................... 60 Cleaning the housing and control panel.............. 60 Cleaning the detergent dispensing drawer ............
- Page 4 Contents Frequently Asked Questions ................65 A wash program cannot be started..............65 Fault message after a program has been interrupted ......... 66 Fault message after the end of the program ............67 Messages or faults affecting the TwinDos system ..........69 General problems with the washer..............
- Page 5 Gentle action ....................... 100 Temp. reduction....................100 Maximum rinse level.................... 101 Suds cooling......................101 Low water pressure ..................... 101 Anti-Crease......................101 Miele@home ......................102 Remote control....................103 SmartGrid ......................103 RemoteUpdate ....................104 Bleach ......................... 105 Detergents and care products ................. 106 Detergent......................
-
Page 6: Caring For The Environment
Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed. -
Page 7: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire, electric shock or injury to persons while using your appliance follow basic safety precautions, including the following: Read all instructions before using the appliance. GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. - Page 8 If the power cord is damaged it must only be replaced by a Miele Service technician with a genuine Miele power cord. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more.
- Page 9 IMPORTANT SAFETY INSTRUCTIONS Do not allow children to play on or in the appliance. Close supervision is necessary when the appliance is used near children. The drum door glass will be hot when washing at very high temperatures. Do not touch the glass. Danger of burns! Keep children away from the washer when in use.
- Page 10 Miele tumble dryer and the Miele washing machine. If installing the machine on a Miele plinth (available as an optional accessory), please make sure you order the correct one for this washing machine.
- Page 11 IMPORTANT SAFETY INSTRUCTIONS FCC Declaration of Conformity These devices comply with FCC Rules Part 15. This equipment has been tested and found to be in compliance with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules of Operation and is subject to the following conditions: These devices may not cause harmful interference.
-
Page 12: Guide To The Washer
Guide to the washer Control panel a Control field d Display The control field consists of a The following values are displayed display and various sensor buttons. and/or selected on the display: The individual sensor buttons are 1. - Page 13 Guide to the washer g sensor button j Sensor button You can view information about the Activate detergent dispensing with a energy and water consumption of capsule by using the sensor buttons. your washing machine with the k TwinDos sensor button with the sensor button.
-
Page 14: Examples On How To Operate The Appliance
Guide to the washer Setting numerical values Examples on how to operate the appliance Start in Scrolling through a list The scroll bar in the display indicates The numerical value is highlighted in that a selection is available. white. -
Page 15: Before Using For The First Time
Before using for the first time Remove the detergent Damage from incorrect cartridges and the drain hose installation and connection. elbow from the drum Installing and connecting the washing machine incorrectly will Two detergent cartridges for automatic cause serious damage to property. detergent dispensing and an elbow See “Installation”. -
Page 16: Miele@Home
- A WiFi network Therefore, the availability of featured functions cannot be guaranteed. - The Miele@mobile app - A Miele user account. The user Miele@home availability account can be created via the The ability to use the Miele app Miele@mobile app. -
Page 17: Setting The Display Text
Confirm with OK. The following message appears in the display: Set up now To set up Miele@home now: touch the OK sensor button. To postpone setup: touch the Turn the program selector to the sensor button until the following Normal program. -
Page 18: Removing The Shipping Struts
Before using for the first time Determining the water hardness 3. Removing the shipping struts Water hardness is an indication of the amount of minerals dissolved in water. Damage resulting from failure to The more minerals in the water, the remove the shipping struts. - Page 19 Agent for Confirm with the OK sensor button. Miele UltraPhase 1 Confirm with the OK sensor button. The following will appear in the display: Set the dosage. Observe water hardness ...
- Page 20 Agent for Confirm with the OK sensor button. Miele UltraPhase 2 Confirm with the OK sensor button. Remove the cover from the detergent cartridge.
-
Page 21: Starting The Calibration Program
Before using for the first time Touch the sensor button until the OK sensor button lights up and confirm with OK. Turn on the faucet. Touch the Start/Add laundry sensor button. The washing machine calibration program has started. It will take approximately 2 hours. -
Page 22: Environmentally Friendly Washing
Miele therefore recommends cleaning the washing machine once every month. The washing machine provides you with a reminder with the message Sanitize info: Run the “Sanitize”... -
Page 23: Feedback
Environmentally friendly washing Feedback 2. Actual consumption You can view the actual amount of You can view information about the energy and water used by a program energy and water consumption of your both during and at the end of the washing machine with the ... -
Page 24: Prepare The Laundry
Tip: Stains (such as blood, egg, coffee, and tea) can be pre-treated using some handy tricks which can be found in the Miele guide to laundry care. Please contact Miele directly or submit a request via Internet page to obtain or view a copy of this manual. -
Page 25: Selecting A Program
2. Selecting a program 2. Selecting additional programs by Switching on the washing setting the program selector to machine “Additional programs/” and using Turn the program selector to a the display: program. Program selection There are three possible ways to select a program: 1. - Page 26 2. Selecting a program 3. Selecting programs via the MobileStart program selector position and the Miele@mobile app Tip: In order to use MobileStart , the washing machine must be logged on to the WiFi network and Remote control must be switched on.
-
Page 27: Loading The Washing Machine
3. Loading the washing machine Opening the door Closing the door Take hold of the door and pull it Make sure that no items are caught open. between the door and the seal. Check the drum for pets or foreign objects before loading it with laundry. -
Page 28: Selecting Program Settings
4. Selecting program settings Options sensor button Selecting a temperature/spin speed You can select extra options using the Options sensor button. You can alter the pre-set temperature/ Touch the Options sensor button. spin speed of a wash program if this is permitted by the program. -
Page 29: Delay Start/Smartstart
4. Selecting program settings Delay start/SmartStart Canceling Delay Start The selected delay-start period can be Delay Start canceled before the program starts. With the Delay Start function, you can Touch the sensor button. delay the start of the program. The selected delay-start period will This function is active when the appear in the display. - Page 30 4. Selecting program settings SmartStart Setting the time period The SmartStart function lets you If you have activated the SmartGrid define a time period during which your function in Settings, SmartStart in washing machine will start instead of will appear in the Start in display when you touch the sensor automatically.
-
Page 31: Adding Detergent
UltraPhase 1 and options: UltraPhase 2 single use cartridges are available to order from your Miele - Using the Booster cap and activating dealer or via Miele online store. the CapDosing - Using chlorine bleach via the ... -
Page 32: Selecting The Degree Of Soiling
5. Adding detergent Selecting the degree of soiling Replacing detergent cartridges The degree of soiling in laundry is Make sure the washing machine is divided into 3 settings: switched on before replacing a detergent cartridge. This will ensure that - Light the counter is set to 0 and the fill level No visible soiling or stains... -
Page 33: Detergent Dispenser Drawer
5. Adding detergent Using chlorine bleach Detergent dispenser drawer This washing machine requires high Damage due to chlorine bleach. efficiency detergent. Adhere strictly to Textiles may be discolored or their the dispensing amounts supplied by the fibers damaged. detergent manufacturer. The detergents Only use chlorine bleach on suitable must be marked with the following textiles. -
Page 34: Adding Powder Detergent
5. Adding detergent Adding powder detergent The detergent dispenser drawer contains an insert for liquid detergent in the compartment. This insert must be removed to use powder detergent. It is not possible to use powder detergent in the compartment. A pre-wash cannot be carried out when using powder detergent. -
Page 35: Adding Fabric Softener
5. Adding detergent Adding fabric softener Tips for dispensing Adjust the detergent dosage to the level of soiling of the laundry and the maximum load. Reduce the amount of detergent with smaller loads (e.g., reduce the amount of detergent by ⅓ when washing a half load). -
Page 36: Capdosing
Each capsule contains the correct amount for one wash cycle. Capsules are available to order from Open the lid of the / Miele’s online store, Miele customer compartment. service, or your Miele dealer. Capsules pose a health risk. - Page 37 5. Adding detergent Deactivating or changing CapDosing CapDosing can only be deactivated or changed prior to program start. Touch the sensor button. Select No Cap (deactivate) or a different type of capsule (change). Color run and dye removers ...
-
Page 38: Starting A Program
6. Starting a program Touch the flashing Start/Add laundry Adding laundry during a sensor button. program sequence (AddLoad) The door will lock and the wash Laundry can be added or removed at program will start. any time, provided that the symbol The program status will appear in the is not illuminated in the display. -
Page 39: Program End
7. Program end Opening the door and removing the laundry The door remains locked during the Anti-crease phase. The display will change to show: End/Anti-Crease Press Start button Unlock the door either by touching the Start/Add laundry sensor button or by turning the program selector to the position. -
Page 40: Spin Cycle
Spin cycle Final spin speed Program Selectable spin speeds in words and numbers (rpm) High Slow 1,600 1,200 Normal – – – Proofing – Delicates – – Sanitize – – Handwash – Dress Shirts –... - Page 41 Spin cycle Rinse-spin Final spin speed in the wash program There is a spin cycle after the main wash and between the rinse cycles. A When a program is selected, the reduction in the final spin speed will optimum spin speed for the wash also reduce the interim spin speed as program is always shown in the display.
-
Page 42: Program Guide
Program guide Programs on the program selector Temperature Item/Tip with garment care label symbols Normal Full load (17.6 lb/8 kg) Cotton, linen, and mixed fibre textiles made of Hot + 140°F/60°C both cotton and linen. 120°F/50°C 105°F/40°C Warm + 85°F/30°C ... -
Page 43: Sanitize X
Warm 85°F/30°C Cold Cold MobileStart The Miele@mobile app is used to select the programs and operate the appliance. QuickIntenseWash Full load (11 lb/5 kg) For lightly or moderately soiled textiles which 140°F/60°C Hot + are also suitable for washing in the Normal ... -
Page 44: Express
Program guide Temperature Item/Tip with garment care label symbols Express Half load (7.7 lb/3.5 kg) Cotton textiles that have hardly been worn or Warm + 105°F/40°C are only very lightly soiled. 85°F/30°C Warm Selecting the Light level of soiling will reduce Cold Cold the washing time by 10 minutes. -
Page 45: Outdoor
Program guide Programs positioned on the More programs/ program selector Temperature Item/Tip with garment care label symbols Outdoor Small load (5.5 lb/2.5 kg) 105°F/40°C Performance outerwear (e.g., jackets and Warm + trousers) made from membrane fabric. 85°F/30°C Warm - Zip up or close any jackets with Velcro before Cold Cold washing. -
Page 46: Silks
Program guide Temperature Item/Tip with garment care label symbols Silks Very small load (2.2 lb/1 kg) 85°F/30°C Silks and other hand-washable textiles with no Warm wool content. Cold Cold Place tights, bras, etc., in a washing bag. Wrinkle-free Half load (8.8 lb/4 kg) ... -
Page 47: Towels
Program guide Temperature Item/Tip with garment care label symbols Towels Full load (11 lb/5 kg) For linen or cotton towels. Hot + 140°F/60°C 120°F/50°C Warm + 105°F/40°C 85°F/30°C Warm Cold Cold Downs Small load (4.4 lb/2 kg) Jackets, sleeping bags, pillows, and other 140°F/60°C Hot + Down Filled Items. - Page 48 Program guide Settings /maintenance Settings You can use the settings to alter the washing machine's electronics to suit changing requirements. See “Settings” for more detailed information. Maintenance The washing machine has two maintenance programs. Clean Machine for cleaning the washing machine. for maintenance of the /...
-
Page 49: Extra Options
Extra options You can supplement the wash SingleWash programs with extra options. For efficiently washing a very small load (< 2.2 lb/1 kg) in a normal wash Selecting extra options program. The wash duration is reduced. Extra options are selected or Please note! deselected using the sensor buttons in When adding detergent manually, only the control field. -
Page 50: Extra Options Can Be Selected Using The Options Sensor Button
Extra options Pre-wash Extra options can be selected using the Options sensor For laundry with large amounts of dirt, e.g., dust and sand. button Pre-wash cannot be combined with Selecting extra options in the display the use of chlorine bleach. Touch the Options sensor button. The chlorine bleach is added too The following will appear in the display: early. -
Page 51: Soak
Extra options Soak For heavily soiled and stained items with protein stains. A soak duration of between 30 minutes and 6 hours in 30-minute increments can be selected for the soak process. See “Settings” for more information. The factory default setting is 30 minutes. -
Page 52: Wash Program Overview - Extra Options
Wash program overview – extra options SingleWash SoftSteam Buzzer Normal – Proofing – – – Delicates Sanitize Handwash – – Dress Shirts ... - Page 53 Wash program overview – extra options Pre-wash Soak Gentle AllergyWash ExtraRinse – – – – – – – – – – – – –...
-
Page 54: Program Sequence
Program sequence Main wash Rinses Spin cycle Water Wash Water Rinses level rhythm level Normal Proofing – Delicates Sanitize Handwash ... - Page 55 Program sequence Special features in the = low water level program sequence = medium water level Anti-crease: = high water level At the end of the program, the drum = intensive rhythm continues to turn at intervals for up to 30 minutes to help prevent creasing.
- Page 56 PowerWash PowerWash is activated automatically PowerWash is a washing technique in the programmes listed above. developed by Miele. It is activated in the following programs: PowerWash is deactivated if: - Normal (with small and medium load - CapDosing (, ) has been...
-
Page 57: Changing The Program Sequence
Changing the program sequence Changing a program (safety Canceling a program lock) You can cancel a wash program at any time after it has started. A program, temperature, spin speed, or selected extra options cannot be Turn the program selector to the changed once the machine has been position. -
Page 58: Detergent
Detergent Detergents recommended by Miele Miele Detergents have been specially designed for day-to-day use in Miele Washing Machines. See “Detergents and care products” for more information about these detergents. Miele Miele Capsules UltraPhase 1 and 2 ... -
Page 59: General Detergent Recommendations
Detergent General detergent recommendations The wash programs that are not listed do not have a detergent recommendation Universal Color Detergent for Bleach detergent detergent Woolens and delicates Normal – Delicates – – – Sanitize –... -
Page 60: Cleaning And Care
Cleaning and care Cleaning the housing and Cleaning the detergent control panel dispensing drawer Washing at low temperatures and the Risk of electric shock. use of liquid detergent can lead to a Mains voltage is present when the build-up of bacteria in the detergent washing machine is switched off dispensing drawer. - Page 61 Cleaning and care Cleaning the compartment Removing and cleaning the insert for liquid detergents Compartment 1 has a siphon for better An insert for liquid detergents is located dispensing of the chlorine bleach. in the compartment of the detergent dispenser drawer.
- Page 62 Cleaning and care Cleaning the siphon and the / compartment channel Liquid starch results in clogging. The siphon in the / compartment no longer works and the compartment can overflow. Clean the siphon particularly thoroughly after using liquid starch a few times.
-
Page 63: Twindos Maintenance
“TwinDosCare” cleaning cartridge or Start Care? an empty TwinDos container, available from www.shop.miele.com. Touch the sensor button until the following appears in the display: The washing machine has a cleaning program for the TwinDos system. -
Page 64: Sanitize Info(Cleaning The Drum)
Cleaning and care Using needle nose pliers, take hold of Sanitize info the plastic filter bar 2 and remove the (Cleaning the drum) plastic filter. Washing at low temperatures and/or Clean the filter. using liquid detergents can cause bacteria and odors to build up in the ... -
Page 65: Frequently Asked Questions
The door is not closed properly. The door lock could in the display: not engage. Service Door release Close the door again. fault F35 Start the program again. If the fault message appears again, contact Miele Customer Service. -
Page 66: Fault Message After A Program Has Been Interrupted
Switch the washing machine on again. Restart the program. If the fault message appears again, contact Miele Customer Service. To switch off the fault indicator: Turn the program selector to the position and... -
Page 67: Fault Message After The End Of The Program
Frequently Asked Questions Fault message after the end of the program Problem Possible cause and solution Excessive foam has built up during washing. Check dosage With TwinDos, check the dosage amount set. Reduce the amount set in 10% increments. ... - Page 68 Check whether the maximum drain height of 3' 3" (1 m) has been exceeded. If the fault message appears again, contact Miele Customer Service. The washing machine can still be used, but without the SoftSteam extra option. The pumps are dirty.
-
Page 69: Messages Or Faults Affecting The Twindos System
Frequently Asked Questions Messages or faults affecting the TwinDos system Problem Possible cause and solution The detergent in the cartridge is running low. There is is almost empty. enough left for approx. 4 to 8 wash programs. Only a few more cy- ... - Page 70 TwinDos sensor button is lit. Detergent is not dispensed even though the TwinDos sensor button is lit. Try again. If detergent is still not dispensed, contact Miele Customer Service. A new detergent car- The washing machine was switched off when the tridge has been in- detergent cartridge was replaced.
-
Page 71: General Problems With The Washer
Frequently Asked Questions General problems with the washer Problem Possible cause and solution The washing machine is The Sanitize info was not observed. When washing, a emitting an odor. wash program using a temperature above 60°C (140°F) has not been run for a long time. ... - Page 72 Frequently Asked Questions General problems with the washing machine Problem Possible cause and solution Large amounts of deter- The water pressure is too low. gent residue remain in Clean the filter in the water intake. the detergent dispenser Powder detergent used in conjunction with water drawer.
-
Page 73: Poor Wash Results
Consequently, fruit, coffee, and tea stains results. cannot always be removed. Use the Miele 2-phase system. The deliberate addition of UltraPhase 2 during the wash process removes stains effectively. Use powder detergent containing a bleaching agent. -
Page 74: The Drum Door Cannot Be Opened
Frequently Asked Questions The drum door cannot be opened Problem Possible cause and solution The door cannot be The drum is locked during a program. pulled open during a Follow the description in “6. Starting a program – program. Adding or removing laundry”. -
Page 75: Opening The Door In The Event Of A Blocked Drain Outlet And/Or Power Outage
Frequently Asked Questions Draining the washing machine Opening the door in the event of a blocked drain outlet and/ Remove the drain filters, though not or power outage completely. Turn off the washing machine. Place a suitable container under the flap, e.g., a bowl or dish. - Page 76 Frequently Asked Questions Opening the door Danger of injury due to rotating drum. Reaching into a rotating drum is extremely dangerous and may result in injury. Always make sure that the drum is stationary before reaching in to remove laundry. ...
-
Page 77: Customer Service
Miele dealer or Miele. Miele dealer or Miele Customer Service. Appliance warranty and You can book a Miele Service Call product registration online at www.miele.com/service. You can register your product and/or Contact information for Miele view the manufacturer´s warranty terms... - Page 78 Installation instructions Alteration rights reserved. Visit our website for all the current product specifications, technical appliance information, and warranty information. To avoid accidents or damage to the appliance, please read these instructions before installing and/or using it.
-
Page 79: Installation
*INSTALLATION* Installation Front view a Drain hose f Detergent dispenser drawer b Hot-water inlet hose (pressure-proof g Door to 870 psi/6,000 kPa) h Flap for drain filters, drain pumps, c Cold-water inlet hose (pressure- and emergency release proof to 870 psi/6,000 kPa) i Flap for TwinDos cartridges d Electrical connection j Four height-adjustable feet e Control panel... -
Page 80: Rear View
*INSTALLATION* Installation Rear view a Drain hose e Cold-water inlet hose (pressure- proof to 870 psi/6,000 kPa) b Transport clips for inlet and drain f Hot-water inlet hose (pressure-proof hoses and power cord to 870 psi/6,000 kPa) c Electrical connection g Safety caps for shipping struts d Protruding lid for holding when h Transport clips for inlet and drain moving the machine... -
Page 81: Installation Surface
(concrete or brick), in order to ensure it cannot fall or slip. Secure the washing machine using a clamp/fastening bracket (MTS floor mounting kit – available from your Miele dealer or Miele Service). -
Page 82: Removing The Shipping Struts
*INSTALLATION* Installation Removing the right-hand shipping Removing the shipping struts strut Removing the left-hand shipping strut Open the cover and use the wrench supplied with the washing machine to Open the cover and use the wrench turn the shipping strut 90°. supplied with the washing machine to turn the shipping strut 90°. - Page 83 *INSTALLATION* Installation Covering the holes Securing the shipping struts Risk of injury from sharp edges. There is a risk of injury from reaching into holes that are not covered. Cover the holes for the shipping struts after they have been removed. ...
-
Page 84: Installing The Shipping Struts
*INSTALLATION* Installation Installing the shipping struts Opening the covers Press against the catch with a thin object (a narrow screwdriver, for example). The cover opens. Installing the shipping struts Install the shipping struts by following the instructions for their removal in reverse order. -
Page 85: Leveling The Machine
*INSTALLATION* Installation Leveling the machine The washing machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electric and water consumption and may cause the machine to move about. Unscrewing and adjusting the feet The four adjustable screw feet are used to level the washing machine. -
Page 86: Installing Under A Countertop
Risk of electric shock due to as a washer-dryer stack together with a exposed cables Miele Tumble Dryer. A WTV stacking kit* There is a risk of coming into contact is required for this. with live parts while the lid is Parts marked with * are available from removed. -
Page 87: Additional Installation Requirements
*INSTALLATION* Installation Setting up the cabinet Additional installation requirements The washing machine must be installed in accordance with the relevant local regulations. Damage resulting from failure to remove the shipping struts. Failure to remove the shipping struts can result in damage to the washing machine and to adjacent cabinetry or appliances. -
Page 88: For Closets At Room Height
*INSTALLATION* Installation For closets at room height Product Dimensions You can also insert a ventilation Dimensions opening at the top of the closet. In addition, you must provide an opening on the bottom side of the door. Risk of damage due to overheating of the washing machine. -
Page 89: Installation On A Plinth
*INSTALLATION* Installation Installation on a plinth - WTS 510 (only available in white) Washer-dryer stack - WTV 512 and WTV 502 washer-dryer stacking kit... -
Page 90: The Water Protection System
Installation Electronic module and washing The water protection system machine housing The Miele water protection system - Sump: Any leaking water is collected protects all parts of the washing in a sump in the base of the machine. machine and its surroundings from A float switches off the water inlet water damage. -
Page 91: Water Intake
*INSTALLATION* Installation Maintenance Water intake Only use a genuine Miele hose that has Health risk and risk of damage been tested to withstand pressure of at due to contaminated incoming water. least 870 psi (6,000 kPa) should you The quality of the incoming water ever need a replacement. -
Page 92: Water Drainage
If required, the hose can be extended to a length of up to 16.4 ft (5 m). Accessories are available from your Miele dealer or Miele Customer Service. For a delivery head of more than 3.2 ft (1 m) (up to a max. of 5.9 ft (1.8 m)) a replacement drain pump will need to be installed. -
Page 93: Electrical Connection
*INSTALLATION* Installation ELECTRICAL INSTRUCTIONS Electrical connection This installation should be performed by GROUNDING INSTRUCTIONS an experienced and qualified This appliance must be grounded. In technician, in accordance with local the event of a malfunction or codes and regulations. breakdown, grounding will reduce the risk of electric shock by The washing machine is supplied with a providing a path of least resistance... -
Page 94: Technical Data
Technical data Height 33 7/16" (850 mm) Width 23 7/16" (596 mm) Depth 25 1/16" (636 mm) Depth with door open 41 1/2" (1054 mm) Height for building under 32 5/16" (+5/16"/-1/16") (820 mm) Width for building under 23 5/8" (600 mm) Weight Approx. -
Page 95: Settings
Settings Selecting settings You can use the settings to alter the washing machine's electronics to suit Touch the sensor buttons until changing requirements. the setting you want appears in the display. The settings can be altered at any time. - The sensor button scrolls down the list. -
Page 96: Language
1. New (full) cartridges are used. 2. The cartridges must not be removed from the washing machine in the interim period. Tip: The level can be corrected via the Miele@mobile app. Select detergent You can either use UltraPhase 1 and UltraPhase 2, or switch TwinDos dispensing off. -
Page 97: Keypad Tone
Settings Keypad tone Consumption Each touch of a sensor button is In this setting you can check the confirmed with an audible tone. saved energy and water consumption values. Options Options Previous program - (quiet) Shows the consumption for the last - ... -
Page 98: Code
Make a note of the new PIN code. If you forget the code, the washing machine will need to be unlocked by Miele Service. Deactivate The washing machine is to be operated again without entering the PIN code. This only appears if the PIN code has been activated previously. -
Page 99: Brightness
Settings Brightness Display switch-off You can set the brightness of the The display and the sensor button display, the sensor buttons, and the lighting is switched off to save energy. dimmed sensor buttons. Start/Add laundry sensor button flashes slowly. Options Options Display Controls the brightness of the... -
Page 100: Memory
Memory is deactivated as standard. Temp. reduction Soak duration At high altitudes, water has a lower You can set a duration for the soak boiling point. Miele recommends process of between 30 minutes and switching on the reduced-temperature 6 hours. setting at altitudes of 6,560 ft (2,000 m) or above to prevent water... -
Page 101: Maximum Rinse Level
Settings Maximum rinse level Low water pressure This function is important for allergy If the water pressure is below 14.5 psi sufferers as it achieves excellent wash (1 bar), the program will be canceled results. and the fault message Water intake See will appear. -
Page 102: Miele@Home
Deactivate - The WiFi connection will be reset to activated) the factory default. Miele@home remains set up; the WiFi The network configuration should be function is turned off. reset whenever a washing machine is being disposed of or sold, or if a used... -
Page 103: Remote Control
Miele@home setting is set up and up and activated. activated. Once the Miele app has been installed This function can be used for starting on your mobile device, you can check your washing machine automatically the status of your washing machine at a time when your energy supplier’s... -
Page 104: Remoteupdate
If you do not install an update, you can The update may take several minutes. continue to use your washing machine Please note the following information in the usual way. However, Miele about the RemoteUpdate function: recommends installing updates. - You will only receive a message when Activating/deactivating an update is available. -
Page 105: Bleach
Settings Bleach You can activate the automatic addition of bleach at the end of the main wash. Bleach may only be used in some programs. See “5. Adding detergent – Using bleach” for more detailed information. Activating bleach extends the program duration by approximately 10 minutes. -
Page 106: Detergents And Care Products
- Excellent stain removal even at low Miele washing machines. temperatures These and many other useful products can be ordered via the Miele online UltraColor (liquid detergent) shop, from your Miele dealer, or from - With color-protection formula for Miele directly (see end of this manual brilliant colors for contact details). -
Page 107: Special-Purpose Detergents
These special-purpose detergents are available as convenient single-use - Visibly renews fabrics with just one capsules. wash - Special Miele formula with Caps Sport Novozymes technology - For synthetic fabrics - Removes pilling and renews color - Neutralizes unpleasant odors thanks... -
Page 108: Fabric Care
Detergents and care products Fabric care Machine care These fabric-care products are available TwinDosCare as convenient single-use capsules. - Cleaning agent for the TwinDos Fabric softener capsules dispensing system - Fabric softener for freshly scented - For use prior to a longer pause in use laundry (at least 2 months) - Pure and thorough cleanliness with a... - Page 111 Customer Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Headquarters and Miele Centre Princeton, NJ 08540 161 Four Valley Drive www.mieleusa.com Vaughan, ON L4K 4V8 www.miele.ca Customer Support Phone: 888-99-MIELE (64353) Customer Care Centre info@mieleusa.com...
- Page 112 WXI 860 en-US M.-Nr. 11 622 880 / 01...