Miele WXI 860 WCS Operating And Installation Instructions page 41

Final spin speed in the wash
program
When a program is selected, the
optimum spin speed for the wash
program is always shown in the display.
A faster spin speed can be selected for
certain wash programs.
The highest selectable spin speed is
indicated in the table.
Omitting the final spin (Rinse hold)
 Set the spin speed to  (Rinse
hold).
The laundry is not spun after the final
rinse and remains in the rinse water.
This helps prevent creasing if the
laundry is not going to be removed from
the drum immediately after the end of
the program.
Ending a program with a spin cycle
The display shows 
alternately with the ideal spin speed.
 Touch the Start/Add laundry sensor
button to start the final spin.
Ending a program without a spin
cycle
 Reduce the spin speed to
 Touch the flashing Start/Add laundry
sensor button.
Rinse hold
.
0
Rinse-spin
There is a spin cycle after the main
wash and between the rinse cycles. A
reduction in the final spin speed will
also reduce the interim spin speed as
appropriate.
Omitting the rinse-spin and final spin
 Before the start of the wash program,
reduce the spin speed to
After the last rinse cycle, the water will
be pumped away and the Anti-crease
phase will switch on.
An Extra Rinse cycle is carried out with
this setting for certain wash programs.
Spin cycle
.
0
41