Table of Contents
Advertisement
Maximum rinse level
This function is important for allergy
sufferers as it achieves excellent wash
results.
The water level in the rinses can be
permanently set to the highest value.
The water consumption will be
increased.
The maximum rinse level is deactivated
as standard.
Suds cooling
Additional water flows into the drum at
the end of the main wash to cool the
suds down.
Suds cooling takes place when a
Normal program with a temperature of
158°F (70°C) or higher is selected.
Suds cooling must be activated:
- to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin
- where the drainage pipes do not
comply with DIN 1986
Suds cooling is deactivated as
standard.
Low water pressure
If the water pressure is below 14.5 psi
(1 bar), the program will be canceled
and the fault message
will appear.
If the on-site water pressure cannot be
increased, activating this function will
prevent the program from being
canceled.
Low water pressure is deactivated as
standard.
Anti-Crease
The Anti-crease function helps prevent
creasing after the end of the program.
At the end of the program, the drum
continues to turn for up to 30 minutes.
The washing-machine door can be
unlocked at any time by touching the
Start/Add laundry sensor button and
then opened.
Anti-crease is activated as standard.
Settings
Water intake See
101
Hide quick links:
Advertisement
Chapters
Table of Contents
